Preview

Медицинский алфавит

Расширенный поиск

Стабильность коротких и длинных зубных имплантатов, установленных на разных уровнях

https://doi.org/10.33667/2078-5631-2022-2-17-24

Аннотация

Цель исследования. Оценка стабильности во время заживления и перед нагрузкой имплантатов, установленных на различных уровнях в зависимости от текстуры их шейки.
Материалы и методы. В исследовании принимали участие пациенты с одинаковым типом кости (II тип), которым были имплантированы винтовые имплантаты с коническим соединением:
– параллельными стенками (полированный воротник – 0,3 мм), установленные на уровне альвеолярного гребня без погружения (группа А);
– корневидной формы с микрорезьбой в области воротника, установленные ниже уровня альвеолярного гребня на 1 мм (группа Б);
– корневидной формы (полированный воротник – 0,75 мм), установленные выше уровня альвеоляроного гребня на 1мм (группа В).
Все имплантаты применяли с формирователями. Значения коэффициента стабильности имплантата (ISQ) определялись с помощью резонансно-частотного анализа сразу после установки имплантата во время операции и через 1, 4, 8 и 12 недель после нее. Другие оцениваемые факторы стабильности – диаметр и длина имплантата, место их установки (верхняя или нижняя челюсти).
Результаты. Всего было оценено 60 имплантатов (по 20 в каждой группе). Средние значения ISQ в исходном состоянии в день опера- ции и через 1 неделю после установки были значительно выше в группе Б (p=0,006, р = 0,022 и p=0,031, соответственно для групп Б, В, А). В последующих точках наблюдения различий не было. Значение ISQ было выше для широких (диаметр – 4.3 мм) имплантатов, чем с меньшим значением диаметра (3,5 мм) и для нижнечелюстных имплантатов, чем для верхнечелюстных во всех точках наблюдения. Если пренебречь данными о диаметре, то длина имплантата не влияла на значения ISQ.
Заключение. Погружение имплантата глубже в кость может имеет значение только для первичной стабильности. Более того, диаметр имплантата и место его установки влияют на первичную и вторичную стабильности до нагрузки, в то время как длина имплантата не играет важную роль, если не учитывать его диаметр.

Об авторах

Р. В. Студеникин
Стоматологическая клиника «Ваш стоматолог»
Россия

К.м.н., главный врач

Воронеж



А. А. Мамедов
ФГАОУ ВО Первый МГМУ им. И.М. Сеченова Минздрава России (Сеченовский Университет)
Россия

Д.м.н., профессор кафедры детской, профилактической стоматологии и ортодонтии Института стоматологии им. Е.В. Боровского

г. Москва



Список литературы

1. Manzano-Moreno, Francisco J., et al. «Factors affecting dental implant stability measured using the ostell mentor device: A systematic review.» Implant dentistry 24.5 (2015): 565–577.

2. Mesa Francisco, et al. «Multivariate study of factors influencing primary dental implant stability». Clinical oral implants research 19.2 (2008): 196–200.

3. Koyuncu, B. Özveri, et al. «The role of concentrated growth factor on implant stability: A preliminary study». Journal of stomatology, oral and maxillofacial surgery 121.4 (2020): 363–367.

4. Al-Nawas Bilal, Wilfried Wagner, and Knut A. Grötz. «Insertion torque and resonance frequency analysis of dental implant systems in an animal model with loaded implants.» International Journal of Oral & Maxillofacial Implants 21.5 (2006).

5. Varghai Kaveh, Steven J. Eppell and Russell Wang. «Effect of drilling speed on dental implant insertion torque». Journal of Oral Implantology 46.5 (2020): 467–474.

6. Ryan Lara L. and Sean S. Kohles. «A temporospatial histomorphometric analysis of bone density adjacent to acid-etched self-tapping dental implants with an external hexagon connection in the female baboon». Clinical Oral Investigations (2021): 1–12.

7. Goldberg Jack et al. «Removal torque and force to failure of non-axially tightened implant abutment screws». The Journal of prosthetic dentistry 121.2 (2019): 322–326.

8. Barewal R.M., Oates T.W., Meredith N. & Cochran D. L. «Resonance frequency measurement of implant stability in vivo on implants with a sandblasted and acid-etched surface». International Journal of Oral & Maxillofacial Implants 18.5 (2003).

9. Rosen Paul S. «Measurement of the “bungee dip” in implant stability using resonance frequency analysis: Two case reports». Compendium 39.10 (2018).

10. Khouja N., Tai W.C., Shen I.Y. & Sorensen J.A. «A Critique of Resonance Frequency Analysis and a Novel Method for Quantifying Dental Implant Stability in Vitro». International Journal of Oral & Maxillofacial Implants 34.3 (2019).

11. Schlesinger Charles D. «RFA and Its Use in Implant Dentistry». Current Concepts in Dental Implantology-From Science to Clinical Research. IntechOpen, 2021.

12. Romero-Ruiz M.M., Gil-Mur F.J., Ríos-Santos J.V., Lázaro-Calvo P., Ríos-Carrasco, B., Herrero-Climent M. «Influence of a novel surface of bioactive implants on osseointegration: A comparative and histomorfometric correlation and implant stability study in minipigs». International Journal of Molecular Sciences 20.9 (2019): 2307.

13. Winnen R.G., Kniha K., Modabber A., Al-Sibai F., Braun A., Kneer R., Hölzle F. «Reversal of Osseointegration as a Novel Perspective for the Removal of Failed Dental Implants: A Review of Five Patented Methods». Materials 14.24 (2021): 7829.

14. Kanathila Hema and Ashwin Pangi. «An Insight into the Concept of Osseodensification-Enhancing the Implant Stability and Success». Journal of Clinical & Diagnostic Research 12.7 (2018).

15. Andersson P., Pagliani L., Verrocchi D., Volpe S., Sahlin H., Sennerby, L. «Factors influencing resonance frequency analysis (RFA) measurements and 5-year survival of Neoss dental implants». International journal of dentistry 2019 (2019).

16. Kittur N., Oak R., Dekate D., Jadhav S., Dhatrak P. «Dental implant stability and its measurements to improve osseointegration at the bone-implant interface: A review». Materials Today: Proceedings 43 (2021): 1064–1070.

17. Marinov X.G., Chelmes C.A., Alucema S.D., Narvà V. P. D., Abarca R. U. «Insertion torque and resonance frequency analysis (ISQ) as predictor methods of implant osseointegration». Journal of Osseointegration 10.3 (2018): 103–107.

18. Makary C., Menhall A., Zammarie C., Lombardi T., Lee S.Y., Stacchi C., Park K.B. «Primary stability optimization by using fixtures with different thread depth according to bone density: a clinical prospective study on early loaded implants». Materials 12.15 (2019): 2398.

19. Grzeskowiak, Remigiusz Maciej. «Surgical implant and tissue interface». (2020).

20. Al-Sabbagh Mohanad, Walied Eldomiaty, Yasser Khabbaz. «Can osseointegration be achieved without primary stability?». Dental Clinics 63.3 (2019): 461–473.

21. Badenes-Catalán Javier, Antonio Pallarés-Sabater. «Influence of Smoking on Dental Implant Osseointegration: A Radiofrequency Analysis of 194 Implants». Journal of Oral Implantology 47.2 (2021): 110–117.

22. Haseeb S.A., Rajendra K., Manual L., Kochhar A.S., Dubey D., Dang G.S. «Comparative Evaluation of Implant Stability, Insertion Torque, and Implant Macrogeometry in Different Bone Densities Using Resonance Frequency Analysis». The Journal of Contemporary Dental Practice 22.6 (2021): 665–668.

23. Delgado-Ruiz, Rafael Arcesio, Jose Luis Calvo-Guirado, and Georgios E. Romanos. «Effects of occlusal forces on the peri-implant-bone interface stability». Periodontology 2000 81.1 (2019): 179–193.

24. Wheelis S.E., Biguetti C.C., Natarajan S., Arteaga A., El Allami J., Lakkasettar Chandrashekar B., Rodrigues D.C. «Cellular and Molecular Dynamics during Early Oral Osseointegration: A Comprehensive Characterization in the Lewis Rat». ACS Biomaterials Science & Engineering 7.6 (2021): 2392–2407.


Рецензия

Для цитирования:


Студеникин Р.В., Мамедов А.А. Стабильность коротких и длинных зубных имплантатов, установленных на разных уровнях. Медицинский алфавит. 2022;(2):17-24. https://doi.org/10.33667/2078-5631-2022-2-17-24

For citation:


Studenikin R.V., Mamedov A.A. Stability of short and long dental implants placed at different levels. Medical alphabet. 2022;(2):17-24. (In Russ.) https://doi.org/10.33667/2078-5631-2022-2-17-24

Просмотров: 123


Creative Commons License
Контент доступен под лицензией Creative Commons Attribution 4.0 License.


ISSN 2078-5631 (Print)
ISSN 2949-2807 (Online)